Temporary Carpet Protection Film and Dispensers

SKU
PC
In stock

Temporary Carpet Protection for renovation

Wide range of temporary carpet protection films which can protect your carpet against dirt, dust, foot traffic, paint spills, construction debris, and a wide variety of other troubles. You can use it for construction, renovation, maintenance, or something else, this carpet plastic protection film will provide ease of mind, knowing that your floors will go unharmed. Made In USA!

  • 100% quality guaranteed 
  • 10 different sizes of Carpet Protection Film
  • Water-based adhesive and Reverse wound for easy installation
  • Leave in place for 45 Days
  • One dispenser fits 3 sizes

Temporary Carpet Protection Film for Construction

Since 1994 Pro Tect has been providing temporary carpet protection film into the Building and Remodeling Industry.  ProTect is a family-owned business and would like to say thank you for stopping by.  

Temporary carpet protection film by Pro Tect is 2 mils thick and made from PE Film.  Using a PE Film makes the film resistant to punctures and allows the carpet film to stretch, rather then tear.  Pro Tect Uses a Water-Based Adhesive on it's carpet protector rolls.   This is important and please only use a carpet protection film brand that uses water-based carpet adhesive film.

What Makes Pro Tect For Carpets Different: 

  • 100% quality guaranteed
  • MADE IN AMERICA
  • 10 different sizes of Carpet Protection Film
  • Water-based adhesive
  • Reverse wound for easy installation
  • Leave in place for 45 Days
  • One dispenser fits 3 sizes

Top rated, Pro Tect for Carpets is known for it's cost savings by protecting carpets on various job sites.  Reverse wound, making it easier to install. You always get one of Pro Tect's "multi-sized" Carpet Film Dispensers.  Once you have installed the carpet film, it becomes "maintenance-free" carpet protection for the next 45 days.  

What Is 45 Day Pro Tect Carpet Protector Film?

For over 25 years Pro Tect has used the same formula to provide a film that stays in place for 45 days.  

Can you leave carpet protector film down longer than 45 Days?

At 45 days or sooner, just pull off the old film and replace it with newer film.  It is safe to keep replacing the film, but don't leave it down longer than 45 days. Carpet Protection Film and Carpet Protector Dispensers can be left in place for up to 45 days on all types of carpets. Carpet Protection protects against damage from spills, dirt, foot traffic and is highly resistant to tears and punctures.  Pro Tect Carpet Protector uses a water base adhesive that is safe on all carpets.

Can You Install Carpet Protector by Hand?

Pro Tect gets asked a lot, "Do I need to buy the Carpet Protector Dispenser in order to use your Carpet Adhesive Film?"  While we would love to sell a Carpet Protection Dispenser with every roll, it just isn't practical.  Our Carpet Protection Film comes reverse wound, simply get it started and roll it out. Does it take longer to install without a Carpet Film Dispenser? Yes, but if you are only getting a couple rolls and don't see yourself using the carpet film over and over, then save yourself some money.

Carpet Protection Film Installed with a Carpet Film Dispenser:

If you plan on using the Carpet Protection on multiple jobs, the Carpet Film Dispenser is a must-have.  It will cut your installation time in half, so you can spend your time on other projects. The Carpet Protection Dispenser is a multi-size dispenser and there are two main sizes:

  • The smaller Carpet Film Dispenser will fit our 24", 30" and 36" widths and both the 200' and 500' lengths.
  • The next size fits 36", 48" and 60" widths and both the 200' and 500' lengths.

Easy Instructions for getting started with a Carpet Adhesive Roll by Pro Tect

On the ends of the roll is a tab that helps you find the start of the carpet protector roll.  Once you find the start of the protection film for your carpet simple begin to unroll the film, pushing it forward with your hands.  Pro Tect Carpet Protection is reverse wound making it easier to roll out on flat surfaces and even down-stairs.  

**** Installer side note**** Pro Tect's installer's like to take about a foot or two, of the carpet film, unrolled and walk that area of film into place.  Once it has been walked down, we will use are feet to push the roll forward.  Walking it into place and repeating this process until the carpet film is installed.

"Do I really need the carpet film dispenser?"

Many people will get on their hands and knees when installing Pro Tect Carpet Protection Rolls and there is nothing wrong with that.  How ever, if you are going to be installing carpet film bi-weekly or more, the carpet protection dispenser is the way to go.

Carpet Protection Film is reverse wound (the sticky side is on the outside of the roll).  That way you can simply put the roll on the floor, get it started and then push it down the hall.  Really no need for a carpet film dispenser if your only doing small areas or not using it very often.  

For those that will be installing carpet protection more often, it will be life changing if you haven't picked one up yet.  Once the roll is loaded onto the dispenser, it makes installing the film almost as easy has pushing a broom.  If you run into your fair share of carpeted stairs, holy cow, protecting the stairs take 30 seconds and is a one person job.  Read on for more info on the carpet protection dispensers.

Carpet Film Dispensers by ProTect

If you plan on using the Carpet Protection on multiple jobs, the Carpet Film Dispenser is a must have!  It will cut your install time in half, enabling you to spend your time on other projects. The Carpet Protection Dispenser is a multi-size dispenser.

  • The smaller Carpet Film Dispenser will fit our 24", 30" and 36" widths and both the 200' and 500' lengths.
  • The next size fits 36", 48" and 60" widths and both the 200' and 500' lengths.

 Can Carpet Protection be used on floors

 Please, Please, do not put carpet protection film on any surface but carpeted.  It would be like putting a sticker on your new hard woods.  Not easy to get off and a ton of elbow grease.  If you do get some on the floor, the best way to remove the film is to slowly heat it up with a "hair drier".  We don't want to melt the film, but heating it up releases it from the film.  Once the film is removed you can use an all natural adhesive remover.

 What to do if you have an adhesive transfer

 Once again, it comes down to water vs oil.  Because we use a water-based adhesive, the clean-up process is simple.   

  1. You have to steam clean the carpet
  2. The wand of the steamer needs to reach 170 degrees.  
  3. An all-natural cleaner or citrus cleaner can be added to the steamers water but not necessary for adhesive removal.  1 cup for every 5 gallons.

If adhesive should transfer, please call us: 1-800-545-0826 We stand behind our products and will help in any way we can!!!

Step-by-Step Guides To Applying Carpet Protection and Using A Dispenser

Protecting a home during construction and remodeling is critically important. The last thing you want to do is damage the home you’re trying to improve! One of the trickiest areas to protect is a carpeted stairway. The structure and shape of certain stairways make it difficult to maneuver protective material.

This guide will help make it easy for you to protect your carpeted stairway with tools and step-by-step instructions from the experts at Pro Tect.

There are two ways to apply carpet protection to a stairway:

  • By hand
  • By using a carpet film dispenser

Our guides will show you how to protect your stairs by applying film by hand, as well as with a dispenser. It also includes instructions on loading a roll on a dispenser and basic dispenser use.

Your Rating